FIXED IND 15UH 135MA 5.6 OHM SMD
HYBRID 17 STEP MOTOR 1:7.2 GEARB
类型 | 描述 |
---|---|
系列: | GS |
包裹: | Bulk |
零件状态: | Active |
类型: | Hybrid Gear Motor |
线圈类型: | Unipolar |
额定电压: | 24VDC |
额定电流(安培): | 850 mA |
每转步数: | 1440 |
步距角: | 0.25° |
准确性: | - |
扭矩 - 保持 (oz-in / mnm): | 56.66 / 400 |
尺寸/尺寸: | Square - 1.654" x 1.654" (42.00mm x 42.00mm) |
nema 帧大小: | 17 |
直径 - 轴: | 0.197" (5.00mm) |
长度 - 轴和轴承: | 0.787" (20.00mm) |
安装孔间距: | 1.220" (31.00mm) |
端接方式: | Wire Leads |
工作温度: | -10°C ~ 50°C |
线圈电阻: | 4.2 Ohms |
特征: | Flatted Shaft |
UNIT2, 22/F., RICHMOND COMM. 香港九龙旺角亚皆老街109号大厦
办公时间:周一至周五,9:00-18:30(GMT+8)
电话: 00852-52612101
GS0500-17M001NMB Technologies Corp. |
HYBRID 17 STEP MOTOR 1:50 GEARBO |
|
82910003Crouzet |
STEPPER MOTOR PM UNIPOLAR 12.7V |
|
82924074Crouzet |
STEPPER MOTOR PM GEARED UNI 6.3V |
|
82920050Crouzet |
MOTOR 829200 - 7 5 48STEP/T - 4 |
|
80927011Crouzet |
MOTOR 82920 GEARBOX RC65 - 48STE |
|
82924033Crouzet |
STEPPER MOTOR PM GEARED UNI 6.3V |
|
GT0300-17M000NMB Technologies Corp. |
HYBRID 17 STEP MOTOR LOW BACKLAS |
|
PD60-3-1076TRINAMIC Motion Control GmbH |
STEPPER MOTOR HYBRID BIPOLAR 24V |
|
103H5210-5214Sanyo Denki SanMotion Products |
STEP, F2 MOTOR, SQ.42, 2 PHASE S |
|
PD57-2-1378-TMCLTRINAMIC Motion Control GmbH |
PANDRIVE NEMA23, 48V, 1.01NM |
|
82920007Crouzet |
MOTOR 829200 - 7 5 48STEP/T - 2 |
|
PD60-4H-1378-TMCLTRINAMIC Motion Control GmbH |
PANDRIVE NEMA24, 48V, 3.1NM |
|
GS0360-17M001NMB Technologies Corp. |
HYBRID 17 STEP MOTOR 1:36 GEARBO |