类型 | 描述 |
---|---|
系列: | GT |
包裹: | Bulk |
零件状态: | Active |
类型: | Hybrid Gear Motor |
线圈类型: | Unipolar |
额定电压: | 24VDC |
额定电流(安培): | 900 mA |
每转步数: | 1440 |
步距角: | 0.25° |
准确性: | - |
扭矩 - 保持 (oz-in / mnm): | 354.07 / 2500 |
尺寸/尺寸: | Square - 2.362" x 2.362" (60.00mm x 60.00mm) |
nema 帧大小: | 24 |
直径 - 轴: | 0.315" (8.00mm) |
长度 - 轴和轴承: | 1.260" (32.00mm) |
安装孔间距: | 1.949" (49.50mm) |
端接方式: | Wire Leads |
工作温度: | -10°C ~ 50°C |
线圈电阻: | 5.8 Ohms |
特征: | Flatted Shaft |
UNIT2, 22/F., RICHMOND COMM. 香港九龙旺角亚皆老街109号大厦
办公时间:周一至周五,9:00-18:30(GMT+8)
电话: 00852-52612101
GT0200-17M000NMB Technologies Corp. |
HYBRID 17 STEP MOTOR LOW BACKLAS |
|
GT0100-23M201NMB Technologies Corp. |
HYBRID 23 STEP MOTOR LOW BACKLAS |
|
PG10-K20-HHE4NMB Technologies Corp. |
SM 10MM DIAMETER PM STEP MOTOR 1 |
|
GS0180-17M001NMB Technologies Corp. |
HYBRID 17 STEP MOTOR 1:18 GEARBO |
|
PD86-3-1278-TMCLTRINAMIC Motion Control GmbH |
PANDRIVE NEMA34, 48V, 7NM |
|
14PM-F447-BPVSNMB Technologies Corp. |
STEPPER MOTOR HYBRID |
|
SM2861-5122Sanyo Denki SanMotion Products |
STEP, F2, SQ.86, 1.8, HALF INCH |
|
82910501Crouzet |
MOTOR 829105 - 15 24STEP/T - 2 P |
|
SM2861-5252Sanyo Denki SanMotion Products |
STEP, F2, SQ.86, 1.8, HALF INCH |
|
SM2861-5052Sanyo Denki SanMotion Products |
STEP, F2, SQ.86, 1.8, HALF INCH |
|
PD57-1-1260-CANOPENTRINAMIC Motion Control GmbH |
PANDRIVE NEMA23, 48V, 0.55NM |
|
82924062Crouzet |
STEPPER MOTOR PM GEARED UNI 6.3V |
|
PG5-K20-HHE5NMB Technologies Corp. |
SM 5MM DIAMETER PM STEP MOTOR 1: |